Power, weight and aerodynamics may be the determining factors in most cycling events, but mountain biking is different – if you can’t handle your bike properly, you will not win.

Just like following a proper training plan to build your fitness, you need to follow a proper framework to improve your technique. After working with Lee McCormack from Lee Likes Bikes, these are the guiding principles we found most effective as we worked on becoming faster mountain bikers.


Base of Support

First things first, everything we are talking about from this point forward refers to a rider in a standing position. Standing allows you to separate your body from your bike, giving you control and increasing your speed potential.

In short, if you’re descending, or going through a technical section, you should probably be standing. Just keep in mind that standing doesn’t require you to only stand in a straight up and down position – it’s much more dynamic than that. Let’s dig in.

Just as when you are standing on the ground, everything starts at your feet. If your feet and legs are not properly placed underneath your body, you will become unstable.

Although your feet are staggered on a bicycle, the center of your base of support is halfway between your feet at the bottom bracket. When standing on your bike, you want your knees to be above or behind your bottom bracket, but never in front of it. When your knees go in front of that point, your weight easily shifts forward and a simple bump in the trail can throw you over the bars.

When people stand up on a bike, they usually put the majority of their weight through their arms. This makes the bike twitchy and unstable. You’ll know you are centered over the base of support when you feel your weight shift back through your legs instead of going through your hands.

Body Position

Put your body in the right position above your base of support by increasing the amount of hinge in your hips, and maintaining a strong, engaged core. This can be tricky to do while remembering to stop your knees from going in front of the bottom bracket, but you’ll get the hang of it. Think less squat and more deadlift.

When standing on a bike in non-technical terrain, you’ll see riders in this position with nearly no bend in their knees. This relaxed position allows you to relax your quads and recover, while still maintaining greater control than sitting down on the bike.

This position changes as you enter technical terrain. The hinge in your hips is increased and your knees bend without going in front of the bottom bracket, allowing you to drop your weight low.

Weight Distribution

Once you are in the properly hinged position over your base of support, you are ready to deal with obstacles on the trail.

Your body instinctually wants to lean back and away from perceived danger. You can’t be blamed for thinking this will stop you from crashing, but you’d be wrong. This usually results in you leaving that hinged position you’ve worked so hard for. Worse yet, when you let instinct take over, your torso and center of mass follow your head and shoulders, making you progressively more unstable.

Ironically, what would help you get through that terrain is staying steadfast in your hinged position, giving you a lower center of mass (more stability) and more traction on the front wheel.

Although you won’t literally be leaning into the danger, it can feel like it at first. With time you’ll have repatterned those instincts, and it will pay off with greater stability and the ability to sustain higher speeds.

Row & Anti-Row

Whether you are riding over a big rock, a drop, a jump or even a berm, the same movement pattern is employed. Some people simply call it “pumping”, but Lee calls these movement patterns Row and Anti-Row. There is a distinct difference between these terms and pumping.

Most people view pumping as a push and pull, or up and down movement, but Row and Anti-Row are more dynamic and powerful. They work together in repeated succession, and if viewed from the side, your handlebars make a consistent, smooth circular motion rather than a simple fore and aft or up and down motion.

Just like a rower on a crew team, the Row movement starts with your hips where you have the most power. From there, your arms continue to pull the bars up and back, effectively leveraging your bike up an obstacle or change in elevation – but your work isn’t done yet.

In nearly every case, you will need to get back down that obstacle or change in elevation. This is where the Anti-Row comes in and helps you push your bike down the backside of the obstacle, maintaining speed and control.

It’s easiest to dial in these movement patterns on a purpose-built machine like Lee’s RipRow™, or within the controlled circumstances of a pump track. When you start timing things properly, you are rewarded with speed, regardless of whether you are on a smooth pump track, or rowing your way through a rock garden.

Braking

A less expected benefit of proper Rowing and Anti-Rowing is the ability to improve your braking. The power of your brakes is only as good as your traction. While a more knobby tire may help you get more traction, the biggest aid to traction is increased weight.

As you Row and Anti-Row over obstacles, you bike follows a pattern of weighting and unweighting. If you can time your braking to coincide with the times when your body is coming down toward the bike, you can effectively increase your weight while breaking and decrease the distance it takes to come to a complete stop.

This has a powerful effect on your control and composure coming down a trail. You no longer feel like turns are coming up too fast, your ability to pick lines will increase, and your overall speed will be higher since you will be braking for shorter distances.

Cornering

While we typically think of rock gardens, jumps and drops as obstacles that require the Row and Anti-Row movement patterns, turns are another great opportunity to use them. If you’ve ever watched a good rider ride a pump track, you’ll notice them gaining speed through turns rather than scrubbing speed off. Part of this comes down to entering the turn wide and carrying a high line on a berm to maintain speed, and the other part comes down to timing the Row, Anti-Row pattern with the shape of the turn.

As you enter the turn, you will want to Anti-Row into the turn, allowing you to Row at the apex and Anti-Row on your way out, providing maximizing traction when it matters most and utilizing the curvature of the berm to increase momentum.

Conclusion

There are plenty of things you can do to improve your bike handling on a mountain bike, but these principles apply no matter what conditions you find yourself in. If you want to be a faster mountain biker, establish a proper base of support, maintain a deep hinge to keep your chest low and stay stable, and endlessly refine the smooth connection between the Row and Anti-Row movements to maintain momentum.


Get even more information on bike handling and our clinic with Lee in Episode 127 of the Ask a Cycling Coach Podcast.

Subscribe to the Podcast

For more cycling training knowledge, listen to the Ask a Cycling Coach — the only podcast dedicated to making you a faster cyclist. New episodes are released weekly.



Share this Post


Jonathan Lee

Jonathan Lee is a Level II USA certified cycling coach and the host of the Ask a Cycling Coach podcast. His background in the sport of motocross has translated into a passion for cycling, mountain biking and all things training. If you have a training question, submit your question for Jonathan to answer on the next episode of TrainerRoad’s podcast.

Train Smart, Get Fast.

Learn how to become a faster cyclist. Sign up now to receive six emails with free cycling advice from Chad Timmerman, a USA Level I certified cycling coach.